Marshall electronic - V-LCD4-PRO-L

Below are all the different types of Marshall electronic. Select the device of your choice, to download the manual

Contents

Marshall V LCD4 PR0 L To operate unit insert the power plug Marshall V PS12 500 into the power jack center pin is 12VDC located on the side of the monitor Turn the unit on by pushing the power button in The unit is turned off by depressing the power button The unit is equipped with NTSC PAL auto recognition logic Simply supply a NTSC or PAL composite video signal to either of the two video BNC connectors labeled IN Select the active BNC input by using the selector switch Adjust the picture by using the control knobs on the top of the unit The V LCD4 PRO L is equipped with an active loop through circuit This loop through will only work when power is supplied to the monitor The monitor also has a 1 4 20 mount located on the bottom of the u ...